Update v4.1.16

Full version Foxta v4.1.16
update_4.1.15_to_4.1.16.zip

PIECOEF+

  • Restoring FCR value in results.

FONDSUP

  • Corrected data control in the loading cases tab.

TASSELDO

  • Correction of isovalues when only one single calculation point is defined.

 

Update v4.1.15

Full version Foxta v4.1.15
update_4.1.13_to_4.1.15.zip

PIECOEF+

  • Redesign of the calculation wizard for kinematic ground deformation under earthquake conditions, taking into account the multi-layered nature of the terrain
  • Secant stiffness matrix calculation

TASPIE+

  • New Matelas wizard for dimensioning massifs reinforced with rigid inclusions
  • Additional printouts of results

FONDPROF

  • New wizard for checking the structural strength of a section, including choice of k1,k2,k3 values
  • New results formatted in English

TASPLAQ

  • Optimization of isovalues and visual addition of min/max.
  • Allow external loads defined on the plate.
  • Correction of the rectangular mesh that ignored refined zones.

Update v4.1.13

Full version Foxta v4.1.13
update_4.1.12_to_4.1.13.zip

  • TASSELDO+
    Update of the calculation engine
    Addition of the technical notice
  • TASPLAQ
    Addition of the technical notice
    Addition of the “Reaction coefficients” view in the printing plates

Update v4.1.12

Version complète Foxta v4.1.12
update_4.1.10_to_4.1.12.zip

  • TASPLAQ
    – Correction of the accuracy of the mesher
  • GROUPIE+
    – Highlighting of the selected pile on the model drawing
  • FONDSUP
    – Added the possibility to customize the name of the variants
  • TASPIE+
    – Correction of the manual wizard for the definition of behavior laws
    – Update of the calculation kernell
  • TASSELDO+
    – Update of the calculation kernell

 

Update v4.1.10

Version complète Foxta v4.1.10
update_4.1.9_to_4.1.10.zip

Updated licensing system

Update v4.1.9

setup_foxta_v4.1.9
update_4.1.8_to_4.1.9.zip

TASPIE

  • Update of the engine
  • Adding new results
  • Added control when defining point by point laws

FONDSUP

  • Changed control on slope β

All

  • It is possible to change the order of the variants (right click on the variant tab)
  • Accented characters are taken into account in machine names by the licensing system
  • Added a link to the licence manager
  • Fixed text/translations and cosmetic bugs

Update v4.1.8

setup_foxta_v4.1.8
update_4.1.7_to_4.1.8.zip

Update license system

Update v4.1.7

setup_foxta_v4.1.7
update_4.1.6_to_4.1.7

Groupie

  • Restore the import of stiffness from TASPIE results

Taspie

  • Correction of bug on the control of the load in head

All

  • Fixed text/translation and cosmetic bugs

 

Update v4.1.6

setup_foxta_v4.1.6
update_4.1.3_to_4.1.6

Taspie+:

  • Addition of a control on the value of the head load in isolated pile mode

Piecoef:

  • Correction of the importation of the deformation g(z) from TASSELDO

Tasseldo:

  • Correction of the representation of loads in front view
  • Update of the kernel engine

Tasplaq:

  • Correction of the representation of the slope
  • Reinstatement of the dehomogenization wizard
  • Reinstatement of the mixed section wizard

 

Update v4.1.3

setup_foxta_v4.1.3
update_4.0.13_to_4.1.3

Taspie+:

  • Update of the calculation engine
  • Activation of a third “calculation mode” allowing to treat the case of a finite number of piles or inclusions (taking into account the edge effects)
  • Activation of an “assisted input” mode to generate t-z/q-z laws from PMT, CPT or G shear modulus tests
  • Ability to explicitly differentiate between positive and negative boundary friction (with automatic capping at ktand x sigv’)
  • Possibility to take into account the influence of a more deformable deep layer
  • Free soil compaction can now be defined point by point independently of the layers
  • Creation of a “results synthesis” tab giving access to the key results necessary for the design of an isolated pile, a group and a rigid inclusion reinforced mass

Tasplaq:

  • Direct access to the angular distortion (local differential settlement) in any direction of the plate
  • Correction of the Excel export of the cutting tool results
  • Correction of the print wizard of the oriented cutting tool

Tasseldo:
Update of the engine

Fondprof:
Results are kept when changing variant

All modules:

  • Update of the interface protection
  • Digital signature of executables and DLLs
  • Correction of the launch window when a Windows zoom is applied

Update v4.1.1

setup_foxta_v4.1.1
update_4.0.13_to_4.1.1

Taspie+

  • Update of the calculation kernel
  • Activation of a third “calculation mode” allowing to treat the case of a finite number of piles or inclusions (taking into account the edge effects);
  • Activation of an “assisted input” mode allowing to generate t-z/q-z laws from PMT, CPT or G shear modulus tests
  • Possibility to explicitly differentiate positive and negative boundary friction (with automatic capping at ktand x sigv’);
  • Possibility to take into account the influence of a more deformable deep layer;
  • The free settlement of the soil can now be defined point by point independently of the layers;
  • Creation of a tab “synthesis of results” giving access to the key results necessary for the design of an isolated pile, in group and to the soil block reinforced by rigid inclusions.

Tasplaq :

  • Correction of the Excel export of the results of the cutting tool
  • Correction of the print wizard of the oriented cutting tool
  • Direct access to angular distortion (local differential settlement) in any direction of the plate

Tasseldo :

Update of the engine

Fondprof :

Results are kept when changing variant

All modules :

  • Update of the interface protection
  • Digital signature of executables and DLLs
  • Correction of the launch window when a Windows zoom is applied

Update v4.0.11

update 4.0.5_to_4.0.11

Maine corrections :

  • Native pdf export
  • Refined mesh in Tasplaq
  • Improved Fondsup impressions

Update 3.3.6

setup 3.3.6

Update v3.3.4

update 3.3.3 to 3.3.4

details available in french only :

  • Correction du bug à la création d’une nouvelle couche de sol dans Fondprof en norme Eurocode 7 version 2018 et en mode pénétrométrique.

Update v3.3.3

update 3.2.13 to 3.3.3

details available in french only :

  • Suite de l’intégration de l’amendement de juillet 2018 de la norme Eurocode 7 concernant Fondprof.
  • Intégration de l’amendement de juillet 2018 de la norme Eurocode 7 concernant Fondprof.
  • Intégration du choix « Essais réalisés » dans Fondprof.
  • Correction de bugs aux changements de pieux dans Fondprof.
  • On peut saisir un nom de pieu dans Fondprof.
  • Quelques corrections de traduction en anglais.
  • Corrections des unités dans Fondsup lorsque la fondation est filante.
  • Compatibilité avec les systèmes coréens.
  • Possibilité d’importer la classe de sol dans l’assistant d’importation de couches de sol du module Fondprof en cadre normatif Eurocode.
  • Correction d’un bug mineur lors d’un changement de langue de l’interface.
  • Légère refonte de l’aspect du logiciel.

Update v3.2.12 to v3.2.13

update 3.2.12 to 3.2.13

  • Bug fixed that prevents calculations from a network location in “\\netname” format
  • Improved user rights management by working in the Windows temporary directory and improving the management of long file names
  • Fixes random bugs arriving while accessing the results and / or the print module
  • Bug fixed when using the Soil Database
  • Bug fixed when using the advanced table editing wizard
  • Bug fixed a bug related to the manual entry of the peak constraint in Taspie+
  • In Taspie+, the unit of yp was wrong in manual input of the peak stress

update_foxta_3.2.9_to_3.2.12.zip

setup Foxta v3.2.12

  • Warning: FoXta now requires Java 8 (32 bits). If you still have Java 6 or 7, please upgrade to Java. Please refer to our FAQ for more information about this update
  • Be careful, this update of FoXta v3 is consequent. If the update fails or if FoXta does not work normally, please uninstall FoXta and then reinstall it completely from the setup file available for download from our website. Even if everything goes well, we strongly advise you to proceed with this reinstallation in order to benefit from a better integration in the operating system. Indeed, project files will now be associated with FoXta v3 and will automatically open by double-clicking on them
  • Addition of educational licenses
  • Wizard section in Piecoef + and Groupie +
  • Taking into account surface degradation in Piecoef +
  • Consideration of group effect and TN proximity in Groupie +
  • Taking into account the dip in Tasseldo. However, during a Tasplaq export to Tasseldo, dip values ​​are not yet exported automatically. A next update will allow
  • Various corrections of the interface

 

update_foxta_3.2.5_to_3.2.9.zip

Setup Foxta v3.2.9

  • Added the fondsup design method from penetrometrique results (CPT)
  • Added the management of layer dip data in Tasplaq (Plane Deformation in 2D)

 

update_foxta_3.2.4_to_3.2.5.zip

Setup Foxta v3.2.5

  • Improved compatibility with new Sentinel LDK protection keys

 

 

update_foxta_3.2.2_to_3.2.4.zip

  • Added compatibility with 64-bit Java
  • Added compatibility with the new keys protection Sentinel LDK. HASP HL keys are still compatible
  • Added compatibility with Windows 10
  • Replacement of point clouds by isovalues in the results of Tasplaq and Tasseldo modules
  • Integration of the new dispatch module errors to Technical Support

 

setup_foxta_v322.exe

Older versions have to be uninstalled before installing the new version Foxta v3.2.2 in order to keep the compatibility between the different tools.

  • Tasplaq offers anautomatic meshing with dimensions definition rather than index. Several definition assistantsare available to generateplates, holes or loads of any shape.
  • Groupie+ : new motor can calculate on its own and in an automatic way the interaction of a piles group in a multi-layersoil. The old manual Groupie stays available.

 

setup_foxta_v314.exe

It’s un upgrade from Foxta v2 (contact us for upgrade prices). The new demo version can be downloaded as a new full version from the Foxta page on this website. You may also find on this webpage some useful information and downloads about the new Foxta v3 version.

Please feel free to contact us for any additional information.

 

foxta_update_v202.zip

  • Module Groupie : correction de l’enregistrement des raideurs. Avec la version précédente de Foxta : après enregistrement puis réouverture d’un fichier, dans l’onglet “Propriétés des pieux”, le tableau des raideurs (mu, ro1, etc : accessibles par la sélection du choix “étendu”) n’était pas rempli correctement avec les valeurs enregistrées. Un calcul du fichier rouvert pouvait donc donner un résultat différent du calcul sur le fichier d’origine, car les données de raideur n’étaient plus les mêmes. Ce problème est corrigé. Il est donc recommandé de vérifier le tableau complet des raideurs lors de la réouverture d’un fichier Groupie enregistré avec les versions précédentes de Foxta, avant de relancer le calcul.
  • Module Piecoef : correction de l’affichage des unités pour les rotations dans l’affichage des résultats sous forme graphique et sous forme de tableaux : les rotations sont exprimées en radians (et non en degrés). Le fichier de résultats affichait bien des radians).